The E30-40HSD electric, stand-up, lift truck series from Hyster Co. boasts lift capacities of 3,000 lb to 4,000 lb. The lift trucks have a three-wheel configuration for a tighter turning radius and improved maneuverability. Dual-steer wheels improve handling for a more stable right turn. Suspended floor plates with anti-fatigue mats absorb and reduce the transmission of vibration and shock to the operator. For additional information contact Hyster Co.; 800-497-8371;

For more information, visit www.hyster.com.

The FS4200 Drywall Screwdriver from Makita weighs only 2.9 lb and has a 6-Amp engine capable of delivering 4,000 rpm. An adjustable depth locator assembly with Sure-Lock is designed for consistent screw depth, and a large variable speed trigger with a lock-on button is designed for continuous use. Other features include a cast-aluminum gear housing contributing to the tool’s lighter weight and an integrated LED to illuminate the work surface. The FS4200 is available with an optional 50-ft cord or a 50-ft twist lock. For more information contact Makita; 800-462-5482;

For more information, visit www.makitatools.com.

The MDF Series of Long Reach Air Tools are designed for a wide variety of removal and surface preparation applications. The MDF15 weighs only 10 lb, and is designed for removal of vinyl, ceramic tile and material buildup at heights above waist-level and overhead. It can produce 3,700 blows per minute with a required flow rate of 6 cfm at 90 psi. The heavy-duty MDF35 employs an internal valve mechanism, which allows the piston to deliver a more powerful blow. It is well-suited to removing slag and scale materials at industrial sites. It can produce 3,100 blows per minute with a required flow rate of 11 cfl at 90 psi. Both models feature a tool-integrated protection system which provides extra 360° support around the tool shank. A 60-ft whip hose comes standard. For information contact General Equipment Co.; 800-533-0524;

For more information, visit www.generalequip.com.

The CS Unitec Model 7 is a Pneumatic-powered Air Mixer and is intended for mixing paint, glue, epoxy, mortar, concrete, refractory cement and other materials in hazardous environments. The mixer is ATEX-approved for use in EX zones with hazardous atmospheres, and is safe to be used around water. The mixer’s 1.5 hp motor has two speed settings of 0-190 rpm and 0-350 rpm, and has the capacity to mix batches of material up to 110 lb. The mixer uses 49 cfm of air at 90 psi and weighs only 15 lb. Mixing paddles are available for medium- and high-viscosity materials. For additional information contact CS Unitec; 800-700-5919;

For more information, visit www.csunitec.com.